Suchfilter
Suchfilter
Produkte
Anbieter
Kategorien
Fabrikat
Produkte ()
Kategorien ()
Händler ()
Fabrikat ()
REISHAUER ULG 46
Anfrage zu dieser Maschine
Preis auf Anfrage
- Referenznummer 1049-771911Baujahr 1986Betriebsstunden keine Angabe
-
Anbieter
Hauptkategorie
MetallbearbeitungsmaschinenKategorie
Gewinde-und SchneckenbearbeitungsmaschinenTyp
Gewinde- u. SchneckenschleifmaschinenFabrikat
REISHAUERTechnische Daten
- Werkstückdurchmesser
- 460 mm
- Gewindelänge
- 900 mm
- Gewindesteigung
- 100 mm
- Gesamtleistungsbedarf
- 10 kW
- Maschinengewicht ca.
- 8 t
- Raumbedarf ca.
- m
Beschreibung
R E I S H A U E R (Switzerland)
Universal -extra large- Thread-and Worm-Grinding Machine
Model ULG 46 Year 1986
________________________________________________________________________________
___
Grinding length 900 mm
Max. workpiece clamping length 1.190/1.400 mm
Workpiece Ø / thread Ø, min./max. 10 460 mm (!)
Length adjustment of workhead on table 210 mm
Max. weight of workpiece approx. 100 kg
Workspindle bore approx. 65 mm
Lead range for single-rib wheels 0.3 100 mm
Max. profile 10 module
Max. lead angle +/- 40 °
Grinding wheel dimensions, Ø x width 350 x 20/40 mm
Relief grinding size 0.03 8 mm
Presettable number of flutes 2 10, 12, 14 and 16
27 workpiece speeds 0.4 160 rpm
Stepless adjustable grinding wheel speeds 72 2.500 rpm
Spindle drive, approx. 10 kW * Total electric load approx.. 25 kW - 400
V - 50 Hz
Weight approx. 8.000 kg
Accessories / Special Features:
Machine was built originally with an increased height of center for a max.
Workpiece swing of
460 mm, this allows thread work on larger workpieces and housings (aircraft
industries)!
Internal Thread grinding device with two dressing devices ( long and
short spindles),
various flanges with grinding wheels
USL 3200 Dressing device for pressure roll profiling, mounted above
grinding wheel.
(not motorized)
USL 700 Dressing device for manual profiling of single ribbed grinding
wheels flanks.
Automatic plunge-cut device. Automatic lift-off of grinding slide for
return of workpiece slide.
Relief grinding device with some cams, also suitable for plunge-in cuts.
Hydraulic tailstock with foot switch and expansion compensation.
Two simple dressing devices, manual operated for straight profiling
Two pieces 3-Point steadies for heavy workpiece supporting
Various flanges, set of change gears, many coolant nozzles, adjusting
gauge, 3 Faceplates
Up to dia 500 mm, separate switch cabinet to adjust various grinding cycles
Lift-off safety hood over the working area, monitored by electric
switches, etc.
There is no Coolant Device available, but connection to a central Coolant
supply with valve control
And with a separate Coolant chiller and a separate standing Dust extraction
unit.
Dieses Inserat wurde erstellt mit MODUL MWS - die Maschinenverwaltung von LogoTech.Zustand
Gebraucht